Ancillary Products For Use With Newton System 500

Newton System 500 Ancillaries are a selection of specialist ancillary products that are critically important for the correct installation of Newton System 500 cavity drain membranes. The ancillaries comprise of a range of products that deal with fixing Newton System 500 to different substrates and surfaces, sealing the membranes, and dealing with protrusions and condensation.

Product Overview

    • Membrane: 503

      Fixing Plug: Multi-plug

      Jointing Tape: Newton Over-tape

      Repairs: Newton Over-tape

    • Membrane: 503 Mesh

      Fixing Plug: Multi-plug

      Jointing Tape: Newton Mesh Tape

      Repairs: Newton Mesh Tape

  • Membrane: 508

    Fixing Plug: Multi-plug

    Jointing Tape: Newton Water seal Tape

    Repairs: Newton Over-tape

    • Membrane: 508 Mesh

      Fixing Plug: Multi-plug

      Jointing Tape: Newton Mesh Tape

      Repairs:  Newton Mesh Tape

    • Membrane: 520

      Fixing Plug: N/A

      Jointing Tape: Newton Water seal Tape

      Repairs: Newton Over-tape

  • Back-Box Liners

    Pre-formed to receive electrical pattress boxes, joists, beams and pipes.

    Sealed to the membrane with Newton Water seal Tape, Over-tape  or Mesh Tape

Key Benefits

The ancillaries comprise of a range of products that deal with fixing Newton System 500 to different substrates and surfaces, sealing the membranes, and dealing with protrusions and condensation.

Typical Applications

Newton Multi-Plug (A1) – For securing Newton System 500 membranes to the wall and for providing a fixing point for 5mm screws and the Newton Helifix Wall Tie

Newton NuSeal Plugs (A2, A3) – For fixing the membrane to vaulted ceilings and sloping soffits

Newton Helifix Wall Ties (WT 155 to 300) – For fixing into the head of the Newton MultiPlug for the tying in of block or brick internal walls that are built in front of the Newton System 500

Newton Insulation Fixing Plugs (IF90) – For fixing Newton Fibran XPS 500-C insulative spacer to the slab/raft where lightweight floor finishes are to be used

Newton Waterseal Tape (A5, A5W) – Double-sided butyl sealing tape used to seal adjacent sheets of Newton membranes

Newton Overtape (A7, A8, A9) – Single-sided butyl tape used to seal the Newton PAC Radon System and around protrusions at 3D detailing

Newton Waterseal Rope (A6, A6w) – Butyl bead for sealing the base of the Newton NuSeal Plug for fixing to vaults and soffits

Newton Mesh Tape (A25) – A meshed variant of Newton Overtape for Newton meshed membranes

Newton Condensation Strip (M14) – For collecting condensation into the Basedrain and not on internal finishes

Newton PipeCollar (A35) – Self-adhesive, preformed pipe seal for sealing a flat membrane to a protruding pipe

Newton Back-Box Liner Single box (BX1) – Waterproof lining for electrical pattress boxes

Newton Back-Box Liner Double box (BX2) – Waterproof lining for electrical pattress boxes 

Newton Pipe Sleeve (BX3) – Preformed waterproof sleeve for 110mm pipe

Newton Joist Liner (BX4) – Waterproof lining for steels and joist ends, size: made to order

Speak to the Experts

For further information about structural waterproofing speak to one of our technical experts:

Call us:  09 527 1829
Email us: info@newtonwaterproofing.co.uk

PDF Downloads

Data Sheet

Declaration of Performance (Condensation Strip M14)

BIM Object

View the BIM Object for Newton Condensation Strip M14