• Newton System 800 Ancillaries

    Newton System 800 Ancillaries

    Ancillary Products For Use With Newton System 800

    Newton System 800 Ancillaries are a selection of specialist ancillary products that are critically important for the correct installation of Newton System 800 damp proofing membranes. The ancillaries comprise of a range of products that deal with fixing Newton System 800 to different substrates and surfaces, sealing the membranes and dealing with protrusions.


    [siteorigin_widget class=”SiteOrigin_Widget_Slider_Widget”][/siteorigin_widget]

    Key Benefits

    The ancillaries comprise of a range of products that deal with fixing Newton System 800 to different substrates and surfaces, sealing the membranes and dealing with protrusions.

    Typical Applications

    • Newton Multi Plug (A1)-For securing Newton System 500 membranes to the wall and for providing a fixing point for 5mm screws and the Newton Helifix Wall Tie
    • Newton 800 Mesh Plugs (A16)-For fixing Newton 805 Newlath to walls
    • Newton Helifix Wall Ties (WT 155 to 300)For fixing into the head of the Newton Multi Plug for the tying in of block or brick internal walls that are built in front of the Newton System 500
    • Newton 800 Newtonite Plugs (A20)-A blue variant of the Newton 800 Mesh Plug, supplied in smaller packs to match the roll size of Newton 803 Newtonite
    • Newton Cob Plugs (A17)-For fixing System 800 membranes to less stable substrates
    • Newton 800 Profile (A19)-Serves as a plaster stop for use with Newton 803 Newtonite and 805 Newlath
    • Newton 801 Mastic (A18) –For application around the holes drilled for the fixing plugs and preventing damp from reaching internal wall finishes
    • Newton Pipe Collar (A35)-Self-adhesive, preformed pipe seal for sealing a flat membrane to a protruding pipe
    • Newton Mesh Tape (A25)-A meshed variant of Newton Over tape for Newton meshed membranes
    • Newton Back-Box Liner single (BX1)-Preformed waterproof lining for electrical pattress boxes
    • Newton Back-Box Liner double (BX2)-Preformed waterproof lining for electrical pattress boxes
    • Newton Pipe Sleeve (BX3)-Preformed waterproof sleeve for 110mm pipe
    • Newton Joist Liner (BX4)-Waterproof lining for steels and joist ends – size made to order
    Speak to the Experts

    For further information about structural waterproofing speak to one of our technical experts:

    Call us: 09 527 1829
    Email us: info@newtonsystems.co.nz

    ADD TO INQUIRY


    PDF Downloads

    Data Sheet