• Newton System 500 Ancillaries

    Newton System 500 Ancillaries

    Ancillary Products For Use With Newton System 500

    Newton System 500 Ancillaries are a selection of specialist ancillary products that are critically important for the correct installation of Newton System 500 cavity drain membranes. The ancillaries comprise of a range of products that deal with fixing Newton System 500 to different substrates and surfaces, sealing the membranes, and dealing with protrusions and condensation.


    [siteorigin_widget class=”SiteOrigin_Widget_Slider_Widget”][/siteorigin_widget]

    Product Overview

    Speak to the Experts

    For further information about structural waterproofing speak to one of our technical experts:

    Call us: 09 527 1829
    Email us: info@newtonsystems.co.nz

    ADD TO INQUIRY


    Membrane: 503

    Fixing Plug: Multiplug

    Jointing Tape: Newton Overtape

    Repairs: Newton Overtape

    Membrane: 508 Mesh

    Fixing Plug: Multiplug

    Jointing Tape: Newton Mesh Tape

    Repairs: Newton Mesh Tape

    Membrane: 503 Mesh

    Fixing Plug: Multiplug

    Jointing Tape: Newton Mesh Tape

    Repairs: Newton Mesh Tape

    Membrane: 520

    Fixing Plug: N/A

    Jointing Tape: Newton Waterseal Tape

    Repairs: Newton Overtape

    Membrane: 508

    Fixing Plug: Multiplug

    Jointing Tape: Newton Waterseal Tape

    Repairs: Newton Overtape

    Back-Box Liners
    Pre-formed to receive electrical pattress boxes, joists, beams and pipes.

    Sealed to the membrane with Newton Waterseal Tape, Overtape or Mesh Tape

    Key Benefits

    The ancillaries comprise of a range of products that deal with fixing Newton System 500 to different substrates and surfaces, sealing the membranes, and dealing with protrusions and condensation.

    Typical Applications

    Newton MultiPlug (A1) –For securing Newton System 500 membranes to the wall and for providing a fixing point for 5mm screws and the Newton Helifix Wall Tie

    Newton NuSeal Plugs (A2, A3) – For fixing the membrane to vaulted ceilings and sloping soffits

    Newton Helifix Wall Ties (WT 155 to 300) – For fixing into the head of the Newton MultiPlug for the tying in of block or brick internal walls that are built in front of the Newton System 500

    Newton Insulation Fixing Plugs (IF90) – For fixing Newton Fibran XPS 500-C insulative spacer to the slab/raft where lightweight floor finishes are to be used

    Newton Waterseal Tape (A5, A5W) – – Double-sided butyl sealing tape used to seal adjacent sheets of Newton membranes

    Newton Overtape (A7, A8, A9) – Single-sided butyl tape used to seal the Newton PAC Radon System and around protrusions at 3D detailing

    Newton Waterseal Rope (A6, A6w) Butyl bead for sealing the base of the Newton NuSeal Plug for fixing to vaults and soffits

    Newton Condensation Strip (M14) – For collecting condensation into the Basedrain and not on internal finishes

    Newton PipeCollar (A35) – Self-adhesive, preformed pipe seal for sealing a flat membrane to a protruding pipe

    Newton Back-Box Liner Single box (BX1) – Waterproof lining for electrical pattress boxes

    Newton Back-Box Liner Double box (BX2) –Waterproof lining for electrical pattress boxes

    Newton Pipe Sleeve (BX3) – –Preformed waterproof sleeve for 110mm pipe

    Newton Joist Liner (BX4) – Waterproof lining for steels and joist ends, size: made to order